Turf Calculator: Lawn Area & Rolls

Measure your lawn and estimate turf rolls from the coverage of your chosen product. Compare measured area with extra and whole-roll quantities.

1. Measure your lawn

Area actually receiving this product; already exclude anything you are leaving out.

Lawn section

Name or an area to leave out (optional)
Optional measured exclusion within this section. Do not subtract it again from known area.

2. Your product details

Preview only: choosing a product does not fill in any numbers.
Choose specific listed facts, then apply them explicitly. Measurements and extras stay yours.
Manual product facts — no listed source applied.
Enter or check your own product details
No sale unit or roll size is assumed.
Supply m² per one roll or per one whole pack, matching your chosen sale unit.
Optional positive whole number. Used only to show the rolls contained in the calculated packs; it does not change pack coverage.
No percentage is assumed. Blank means the requirement before extra; it is not a fitting or laying allowance recommendation.

Only your measurements and the facts you choose are used. Confirm suitability and the final order with your supplier.

Enter your lawn measurements to see an estimate.

Private to this browser. Nothing is added to My Materials List automatically.

How the estimate works

Rectangle area = length × width. Circle area = π × (diameter ÷ 2)². Net measured area = sum of complete, confirmed non-overlapping section areas minus each section’s measured exclusion once. Known area is already net. Requirement = net area + net area × (supplied extra percent ÷ 100); blank extra adds nothing. Whole selected sale units = ceiling(requirement ÷ supplied m² per sale unit), using the shared floating-point boundary guard. Purchased coverage = whole units × supplied coverage; arithmetic surplus = max(0, purchased coverage − requirement). Rolls in packs = whole packs × explicitly supplied positive whole rolls per pack, only when provided.

Coverage arithmetic only, not a roll-cut, layout or fitting plan, an agronomy decision, or a sufficient-order guarantee. No standard roll size, pack contents or extra percentage is assumed. Irregular lawns need a reliable known net area or complete non-overlapping measured sections. Coverage surplus does not establish reusable strips or offcuts.

Reading your result

The measured lawn area is the ground you entered. Your extra is shown separately. Whole rolls or packs use only your chosen coverage; arithmetic surplus is not proof that offcuts are usable or the order will be sufficient.

Worked example

Hypothetical inputs, not a standard roll specification: a 5 m × 4 m rectangle is 20 m². Choose Roll, supply 0.8 m² per roll and explicitly enter 0% extra. The count is ceiling(20 ÷ 0.8) = 25 whole rolls. This is coverage arithmetic, not a statement that particular strips fit the lawn.

What to measure

Choose measured sections or a reliable known net lawn area. Enter complete rectangles or circles and measured exclusions, then confirm non-overlap when combining sections. For a purchase count, choose rolls or packs and supply the area covered by one of that chosen sale unit. Pack coverage means m² per whole pack, not per roll. Extra area and rolls per pack are optional facts you supply.

Is every turf roll 1 m²?

No. No roll coverage is assumed. Enter the coverage of one roll yourself, or choose packs and enter the coverage of one whole pack.

Can I calculate packs without knowing their roll count?

Yes. Supplied coverage per whole pack is enough for a whole-pack count. Rolls contained in those packs are shown only when you explicitly supply a positive whole rolls-per-pack value.

What happens when sale unit or coverage is missing?

Measured area and any explicitly supplied extra remain visible, with missing-information guidance. No purchase count is guessed.

How do separate sections and exclusions work?

Use complete rectangles or circles and confirm that multiple sections do not overlap. Each section’s measured exclusion is deducted once. Known lawn area is already net and is not reduced by inactive section exclusions.

What does a blank extra allowance mean?

No extra has been supplied. The result is a before-extra quantity, not a recommended waste or fitting percentage. Enter 0% if you want to state zero extra explicitly.

Does enough total coverage mean rolls or strips fit?

No. Total coverage and arithmetic surplus do not determine cuts, layout, usable offcuts, narrow-strip fit or whether an order is sufficient. The calculator makes no such claim.

Can I enter a coverage range?

This calculation needs one positive supplied coverage per chosen sale unit. A range such as 0.7–0.9 is not a numeric coverage fact and is not converted to a midpoint.

Where the numbers come from

Formula v1.0. Numerical product facts start blank unless you explicitly apply a verified option. Supplier facts checked 14 November 2026; they do not establish stock, delivery, suitability or a final order.

Other garden quantities

Grass Seed · Artificial Grass · Gravel and topsoil · Raised-bed soil · Plan a patio (a separate project)