Connected project workspace

Tile a bathroom from the surfaces you measure.

Q: How is bathroom tile quantity calculated?

Calculator.Shop totals included surface areas, subtracts the explicit deductions, applies the tile allowance you enter and converts the required coverage into whole tiles. Pack rounding is shown only when an actual pack coverage is entered.

Q: Should I allow extra tiles for waste?

An explicit tile allowance can cover cuts or breakage. Choose and review the percentage for the project rather than relying on an implied value.

Q: Does this estimate grout and adhesive too?

Yes. Grout and adhesive use the shared net tiled area, while their joint geometry, density, coverage, allowance and bag-size values remain separate visible inputs.

Add each wall, floor or rectangular surface once. The workspace totals only the included areas, removes only the deductions you enter, then keeps tiles, adhesive and grout as distinct requirements.

01 Project details and inputs

Project details

Project label optional · local onlyUse a short label, not an address. It stays in this browser only when you choose Save.

Tiled surfaces

Add each wall, floor or custom rectangular surface you plan to tile. Only use a deduction when you have measured an area you will not tile.

Surface1

Surface labelSurface typeSurface unitsInclude this surfaceOnly included surfaces feed the project total.

Length mWidth / height m

Shared tile inputs

Tile size and allowance are shared across the project. Enter pack coverage only when you have it from the specific product.

Tile width mmTile height mmTile allowance %Extra tiles for cuts or breakage.Tile pack coverage m² optionalLeave blank to show tile quantity and coverage only.

Tile adhesive inputs

Enter the coverage rate and pack size for the adhesive you have selected. This workspace does not choose a product or application method.

Your coverage rate kg/m²Adhesive allowance %Adhesive bag size kg optionalLeave blank when you only need the kg estimate.

Grout inputs

Joint geometry and density remain separate, explicit inputs because they affect grout quantity.

Joint width mmJoint depth mmGrout density assumption kg/LUse the chosen product information where available.Grout allowance %Grout bag size kg optionalLeave blank when you only need the kg estimate.

Notes optional · local onlyYour planning note

Saved local projects

Current project materials list

Tile a bathroom plan

Add your tiled surfaces, explicit deductions and product inputs to create a local materials list.

No supplier, price, quote, merchant or external data is used.

Calculation audit

Gross area, deductions, net tiled area and source formulas will show here.

Project materials list

Tiles, adhesive and grout will remain distinct with their own allowance and pack rounding.

Assumptions

ScopeOnly the surfaces and product values you enter are included.

Merchant / product confirmation checklist

Confirm the exact tile pack coverage and number of tiles in the selected pack.
Confirm dye or batch availability where relevant.
Confirm adhesive suitability and actual coverage with the manufacturer or merchant.
Confirm grout suitability, joint width and joint depth against the selected product.
Confirm actual product coverage and final quantities before ordering.

Value origins

Measurements, choices and product values you enter will remain distinct from the areas, quantities and rounding calculated in this browser.

What does this project calculate?

A traceable material plan.

It adds included surface areas, subtracts the explicit exclusions on each surface and passes the shared net tiled area to the existing tile, tile adhesive and grout formulas. Each material retains its own allowance, product inputs and pack rounding.

What measurements do I need?

Use the measurements you can check.

Have the length and width or height of every wall, floor or rectangular surface you plan to tile. Add a door, window, bath panel or other exclusion only after measuring its area. Keep actual tile size, product coverage, joint dimensions and pack information ready.

What will the result contain?

A supplier-neutral local list.

A browser-local list shows gross area, deductions, net tiled area, tile coverage and units, adhesive kg, grout kg, visible allowances, formula versions and pack rounding only where you supplied a real pack value.

Bathroom tile planning questions

Simple answers before you begin.

What do I need to measure before tiling a bathroom?

Measure each wall, floor or rectangular surface you intend to tile. Record only the door, window, bath panel or other area you have chosen to leave untiled.

How is bathroom tile quantity calculated?

The workspace totals included surface areas, subtracts the deductions you entered, applies your tile allowance and converts the required coverage into whole tiles. It rounds to packs only if you enter a real pack coverage.

Should I allow extra tiles for waste?

Use the visible tile allowance for cuts or breakage and review it for the particular layout. The workspace does not imply a percentage that you have not selected.

Does this estimate grout and adhesive too?

Yes. The shared net tiled area feeds the grout and adhesive calculations, while their product coverage, joint geometry, density, allowance and pack-size values remain separate inputs.

Compatible calculator sources

Each material retains its source.

The connected workspace reuses deterministic calculation patterns from the tools below. It does not alter their canonical URLs or replace a standalone calculation when you need to inspect it in detail.