Garden space
Enter your measurements to work out this space.
Measure your spaces, choose what goes where, and keep your material estimates together.
Keep lawns, patios, paths and decking as separate spaces. Split complex shapes into complete simple parts, or enter a reliable net area.
Enter your measurements to work out this space.
A space’s finish guides your choices; it never adds a material automatically. Ground layers need your own depth. Beds, walls and fences need their own relevant measurements.
No estimates added yet. Choose only what you need.
Each estimate stays separate. Check missing quantities, product sale units and installation needs before buying.
Calculate after your latest changes to see a current summary.
No automatic saving or account. Inputs stay in this browser, separate from other projects and My Materials List. Clearing site data removes local records.
Start with what you can measure. A rectangle uses length × width; a circle uses its measured diameter. Subtract an actual exclusion only from its own measured space. A known net area has already had those exclusions removed. Confirm separate spaces do not overlap before combining their ground areas.
Then add the material estimates you want. Turf needs chosen roll coverage; seed needs the rate for your actual sowing purpose and chosen pack mass. Artificial grass needs complete rectangular cut dimensions, explicit direction and roll width—not just a lawn’s area. Decking and paving need their actual product and gap facts. The Paving panel offers listed single-size packs from Wickes and Trade Superstore Online: apply their slab dimensions and exact contents only after choosing regular rows, then enter your own joint width and any extra. You can always use or edit your own product details. Soil and ground layers need the depth or volume you already decided.
Measured garden area is not the same as purchase coverage or a cutting plan. For example, a 4 m × 3 m patio is 12 m²; a separate 3 m × 2 m lawn is 6 m². With confirmed non-overlap their ground area is 18 m², but the paving units and turf rolls still belong to two separate estimates. Blank extra means a before-extra estimate, not a recommended allowance.
Keep planting, ground preparation, levels, drainage, permissions, boundaries, structural design and fitting decisions separate. This project does not choose layers, foundations, joists, hole sizes, plant species or installation methods, and quantities are not a sufficient-order guarantee.
Detailed patio planning · Detailed garden wall planning · Detailed fence planning
For bark or loose mulch, use the separate Mulch & Bark Calculator with your chosen depth. It does not add a mulch layer to this plan automatically.
For already-specified work, keep excavation, concrete and concrete ingredients as separate estimates. This page does not infer their specifications.
Yes. Start with separately measured spaces or reliable known net areas. Choose the finishes you are considering and add only needed estimates. Product quantities remain unavailable until their relevant coverage, rate, size or sale-unit facts are supplied.
Keep the spaces separate and confirm they do not overlap before combining their ground areas. Material quantities stay with their own space and calculator; turf rolls, seed packs, paving and decking are not interchangeable totals.
No. Soil and ground layers need the depth or volume you already decided. Inside raised beds, wall faces, fence runs and post holes need their own relevant measurements. Get site, structural, drainage, planting and installation decisions separately.
Only an explicit Save writes the project inputs to this browser on this device. No account is needed and no measurements are sent to retailers. Current outputs are recalculated when you load, copy or print; clearing site data removes the local records.